Skip to main content

Graphene-based spin field-effect transistor: New revolution for room temperature controller

Current semiconductor logic devices within our computers use the flow and control of electronic charge for information processing. Spintronic memory devices use the intrinsic properties of electron spin to store information. For future devices, researchers are searching for ways to integrate both information processing and storage in one device unit.
"Graphene is an excellent medium for spin transport at room temperature, due to its low atomic mass. However, an unsolved challenge was to control the spin current at ambient temperature" explains Saroj Dash, group leader and Associate Professor at Chalmers University of Technology.
The Graphene Flagship researchers Andre Dankert and Saroj Dash have now shown that it is possible to electrically manipulate the spin properties of graphene in a controlled manner at room temperature. This not only could open many new possibilities in spin logic operations but also integration with magnetic memory elements in a single device. With further developments, if one could produce a spin current without charge flow, this will require far less power and lead to more versatile devices. This is especially important as we move more and more toward hand held mobile computing.
"Controlling the flow of spin currents in a transistor-like manner is a decade old dream and the missing link towards all-electrical spin logic applications." says the lead author Andre Dankert from Chalmers University of Technology, "Researchers were working for almost ten years to understand the spin transport properties of various layered materials and how they can be tuned to achieve this goal. Our work is an important milestone in the field of spintronics."
Graphene has been shown to transport spin over long distances by several Flagship Groups. Combining graphene with another layered material where spin lasts much less time can produce a spin field-effect transistor like device.
Talking about creating spintronic devices using a heterostructure is Saroj Dash, "By combining graphene, where spin lasts for nano seconds with molybdenum disulfide where spin only lasts for picoseconds you can control where the spin can go by using a gate voltage -- essentially you can create a spin switch. Importantly, we show in this research a particular materials mix which enables this spin-switch to work at room temperature."
Saroj Dash also added "We have been working on graphene spintronics for a number of years and we joined the Graphene Flagship because our goals are aligned with that of the Flagship spintronics work package -- to investigate room temperature graphene spintronics devices, joining together theoretical and experiment research. The collaborative nature of the Graphene Flagship community, with its focus on face to face meetings has lead to many fruitful discussions within our spintronics field. This collaborative approach also led to a great relationship with our commercial partner Graphenea, who has worked with us to provide the graphene sample we needed."
Speaking about the next steps in his research Andre Dankert said, "Now we know the crucial parameters of our device structure, we can optimise it to increase the effective gain and transistor action."
Many layered materials are promising for spintronics. In addition to exploring the interesting properties of these individual crystals, it is intriguing to reveal the potential of their heterostructures. The bigger goal is to create novel spin phenomena in layered materials based devices by stacking different layers with complementary properties, Saroj Dash explained.
Bart van Wees, leader of the spintronics work package adds, "The future challenge will be to explore and use the new spintronic functionalities which are made possible by the new van der Waals heterostructures. The authors already made an important step here."
Professor Andrea Ferrari, Chair of the Management Panel and Science and Technology Officer of the Graphene Flagship added: "spintronics has been one of the fundamental work packages since the start of the Flagship. It was always seen as a long term investment. It is exciting to see that so much progress has been made towards devices"
Journal Reference:
  1. André Dankert, Saroj P. Dash. Electrical gate control of spin current in van der Waals heterostructures at room temperature. Nature Communications, 2017; 8: 16093 DOI: 10.1038/NCOMMS16093
Labels:

Comments

Post a Comment

Popular posts from this blog

Linking hydrogen atom to silicon surface: A new way for greener, smaller and faster electronics

A key step in unlocking the potential for greener, faster, smaller electronic circuitry was taken recently by a group of researchers led by UAlberta physicist Robert Wolkow. The research team found a way to delete and replace out-of-place atoms that had been preventing new revolutionary circuitry designs from working. This unleashes a new kind of silicon chips for used in common electronic products, such as our phones and computers. "For the first time, we can unleash the powerful properties inherent to the atomic scale," explained Wolkow, noting that printing errors on silicon chips are inevitable when working at the atomic scale. "We were making things that were close to perfect but not quite there. Now that we have the ability to make corrections, we can ensure perfect patterns, and that makes the circuits work. It is this new ability to edit at the atom scale that makes all the difference." Think of a typing mistake and the ability to go back and white
Post a Comment
Read more

Nanophotodetectors with nanocavities to improve the performance of optoelectronic devices.

In today's increasingly powerful electronics, tiny materials are a must as manufacturers seek to increase performance without adding bulk. Smaller also is better for optoelectronic devices -- like camera sensors or solar cells -- which collect light and convert it to electrical energy. Think, for example, about reducing the size and weight of a series of solar panels, producing a higher-quality photo in low lighting conditions, or even transmitting data more quickly. However, two major challenges have stood in the way: First, shrinking the size of conventionally used "amorphous" thin-film materials also reduces their quality. And second, when ultrathin materials become too thin, they become almost transparent and actually lose some ability to gather or absorb light. Now, in a nanoscale photodetector that combines a unique fabrication method and light-trapping structures, a team of engineers from the University of Wisconsin-Madison and the University at Buffalo ha
Post a Comment
Read more

Nanoimprinting accelerating the fabrication of nano-optical devices

Combining speed with incredible precision, a team of researchers has developed a way to print a nanoscale imaging probe onto the tip of a glass fiber as thin as a human hair, accelerating the production of the promising new device from several per month to several per day. The high-throughput fabrication technique opens the door for the widespread adoption of this and other nano-optical structures, which squeeze and manipulate light in ways that are unachievable by conventional optics. Nano-optics have the potential to be used for imaging, sensing, and spectroscopy, and could help scientists improve solar cells, design better drugs, and make faster semiconductors. A big obstacle to the technology's commercial use, however, is its time-consuming production process. The new fabrication method, called fiber nanoimprinting, could unplug this bottleneck. It was developed by scientists at the Molecular Foundry, located at the Department of Energy's Lawrence Berkeley Nat
Post a Comment
Read more