Skip to main content

Reducing oxygen content improving the nanocrystalline materials

Researchers at the University of Connecticut have found that reducing oxygen in some nanocrystalline materials may improve their strength and durability at elevated temperatures, a promising enhancement that could lead to better biosensors, faster jet engines, and greater capacity semiconductors.
"Stabilizing nanocrystals at elevated temperatures is a common challenge," says Peiman Shahbeigi-Roodposhti, a postdoctoral research scholar with UConn's Institute of Materials Science and the study's lead author. "In certain alloys, we found that high levels of oxygen can lead to a significant reduction in their efficiency."
Using a special milling process in an enclosed glove box filled with argon gas, UConn scientists, working in collaboration with researchers from North Carolina State University, were able to synthesize nano-sized crystals of Iron-Chromium and Iron-Chromium-Hafnium with oxygen levels as low as 0.01 percent. These nearly oxygen-free alloy powders appeared to be much more stable than their commercial counterparts with higher oxygen content at elevated temperatures and under high levels of stress.
"In this study, for the first time, optimum oxygen-free nanomaterials were developed," says Sina Shahbazmohamadi, an assistant professor of biomedical engineering at UConn and a co-author on the paper. "Various characterization techniques, including advanced aberration corrected transmission electron microscopy, revealed a significant improvement in grain size stability at elevated temperatures."
Grain size stability is important for scientists seeking to develop the next generation of advanced materials. Like fine links in an intricately woven mesh, grains are the small solids from which metals are made. Studies have shown that smaller grains are better when it comes to making stronger and tougher metals that are less prone to cracking, better conductors of electricity, and more durable at high temperatures and under extreme stress. Recent advances in technology have allowed materials scientists to develop grains at the scale of just 10 nanometers, which is tens of thousands of times smaller than the thickness of a sheet of paper or the width of a human hair. Such nanocrystals can only be viewed under extremely powerful microscopes.
But the process isn't perfect. When some nanograins are created in bulk for applications such as semiconductors, the stability of their size can fluctuate under higher temperatures and stress. It was during the investigation of this instability that Shahbeigi-Roodposhti and the UConn research team learned the role oxygen played in weakening the nanocrystals' stability at high temperatures.
"This is only a first step, but this line of investigation could ultimately lead to developing faster jet engines, more capacity in semiconductors, and more sensitivity in biosensors," Shahbeigi-Roodposhti says.
Moving forward, the UConn researchers intend to test their theory on other alloys to see whether the presence or absence of oxygen impacts their performance at elevated temperatures.

Journal Reference:

  1. Peiman Shahbeigi Roodposhti, Mostafa Saber, Carl Koch, Ronald Scattergood, Sina Shahbazmohamadi. Effect of oxygen content on thermal stability of grain size for nanocrystalline Fe10Cr and Fe14Cr4Hf alloy powders. Journal of Alloys and Compounds, 2017; 720: 510 DOI: 10.1016/j.jallcom.2017.05.261
Labels:

Comments

Post a Comment

Popular posts from this blog

Nanoimprinting accelerating the fabrication of nano-optical devices

Combining speed with incredible precision, a team of researchers has developed a way to print a nanoscale imaging probe onto the tip of a glass fiber as thin as a human hair, accelerating the production of the promising new device from several per month to several per day. The high-throughput fabrication technique opens the door for the widespread adoption of this and other nano-optical structures, which squeeze and manipulate light in ways that are unachievable by conventional optics. Nano-optics have the potential to be used for imaging, sensing, and spectroscopy, and could help scientists improve solar cells, design better drugs, and make faster semiconductors. A big obstacle to the technology's commercial use, however, is its time-consuming production process. The new fabrication method, called fiber nanoimprinting, could unplug this bottleneck. It was developed by scientists at the Molecular Foundry, located at the Department of Energy's Lawrence Berkeley Nat...
Post a Comment
Read more

Intel's upcoming 10-nanometer chip manufacturing technology

At long last, chip giant  Intel  (NASDAQ: INTC) opened up about its upcoming 10-nanometer chip manufacturing technology, at its first-ever Technology and Manufacturing Day. The company has -- frustratingly -- kept key details of this technology under wraps for years now, but Intel is now putting them out there for all to see.  Without further ado, let's look at what Intel had to tell us about this new tech. A large jump in density Let's talk performance Competitive comparison and no yield information Image source: Intel. Chipmakers generally like to reduce the area of its transistors with major new technology shifts. This area reduction is important in reducing transistor costs on a yield-normalized basis, a really important factor for product cost. Chipmakers are ultimately able to cram more features and functionality into a chip while maintaining reasonable cost structures. Intel says that in moving from 14 nanometers to 10, it's delivering an incre...
Post a Comment
Read more

Spintronics in place of electronics : Future of IoT

Information technologies of the future will likely use electron spin -- rather than electron charge -- to carry information. But first, scientists need to better understand how to control spin and learn to build the spin equivalent of electronic components, from spin transistors, to spin gates and circuits. Now, researchers have developed a technique to control and measure spin voltage, known as spin chemical potential. The technique, which uses atomic-sized defects in diamonds to measure chemical potential, is essentially a nanoscale spin multimeter that allows measurements in chip-scale devices. The research is published in  Science . "There is growing interest in insulating materials that can conduct spin," said Amir Yacoby, Professor of Physics in the Department of Physics and of Applied Physics at Harvard John A. Paulson School of Engineering and Applied Sciences and senior author of the paper. "Our work develops a new way to look at these spins in material...
Post a Comment
Read more